Tauri Plugin — SerialPort

A comprehensive plugin for Tauri applications to communicate with serial ports. This plugin provides a complete API for reading from and writing to serial devices, with support for various configuration options and control signals.

v3.0 breaking change: listen / startListening / disconnected were removed. Use watch() and SerialPort.getCapabilities(). See Migrating to v3 below.

---

Migrating to v3

In v2 you attached stream callbacks separately (startListening / listen / disconnected). In v3 one call — watch() — registers all of them; stop with the returned handle.

// v2
await port.startListening();
await port.listen((data) => console.log(data));
await port.disconnected((reason) => console.log("gone", reason));
await port.cancelListen();

// v3 — same thing in one watch()
const handle = await port.watch({
  onData: (data) => console.log(data),
  onDisconnect: (reason) => console.log("gone", reason), // replaces disconnected(fn)
});
await handle.unwatch();

v2	v3
startListening() + listen(fn)	const handle = await port.watch({ onData: fn })
disconnected(fn)	pass onDisconnect: fn into the same watch({ ... })
cancelListen() / stopListening()	await handle.unwatch()

Legacy Tauri events (plugin-serialplugin-read-*) and Android plugin triggers (serialData, serialError) are no longer part of the public API.

New in v3: SerialPort.getCapabilities() — { transport, platform, version } from Rust (cfg!), if the app needs to branch by platform (replaces ad-hoc window / @tauri-apps/plugin-os probing on the app side).

Breaking API changes (v3):

Field / behavior	v2	v3
AtCommandResult.raw / ExchangeResponse.raw	number[]	Uint8Array
AtCommandResult.timedOut	literal false	boolean (timeouts surfaced by native layer)
open()	void	returns canonical path (Android re-keys to UsbPath.sessionKey; desktop echoes input)
cancel_read	also detached watch on some builds	does not unwatch — use close() or handle.unwatch()
TX queue after error	port could stay halted until reopen	next exchange / sendAt job runs normally (stopOnError only stops remaining phases in one sendAtPhases batch)
Early RX before exchange	often lost or raced with wait	native hub keeps idle bytes; exchange replays them via take_idle_bytes after write (no extra line response needed)

Watch events (SerialEvent)

kind	Meaning	Port stays open?
data	Incoming bytes (decoded to string in JS when decode !== false)	Yes
error	Non-fatal notification (e.g. emitter glitch); watch continues	Yes
disconnect	Fatal end of stream (unplug, IO manager stopped); triggers auto-reconnect if enabled	No (isOpen = false)

Watch options

Option	Desktop	Android
timeout	Batch coalescing window (ms)	Coalescing / flush hint where supported
serialDataFlushIntervalMs	Preferred batch interval; falls back to timeout	BufferedEmitter flush (10–2000 ms)
size	Read chunk size per syscall	Reserved
decode	JS-only: TextDecoder on onData	JS-only

---

Table of Contents

1. Installation
2. Basic Usage
3. TypeScript Support
4. Log Level Control
5. Rust Usage
6. Permissions
7. API Reference
   7.1. Port Discovery
   7.2. Connection Management
   7.3. Data Transfer
   7.4. Port Configuration
   7.5. Control Signals
   7.6. Buffer Management
   7.7. Log Control
   7.8. Auto-Reconnect
8. Common Use Cases
9. Android Setup
10. Contributing
11. Development Setup
12. Testing
13. Partners
14. License

---

Installation

Prerequisites

• Rust version 1.70 or higher
• Tauri 2.0 or higher
• Node.js and an npm-compatible package manager (npm, yarn, pnpm)

Automatic Installation (Recommended)

Use the Tauri CLI to automatically install both the Rust and JavaScript parts of the plugin:

# npm
npm run tauri add serialplugin

# yarn  
yarn run tauri add serialplugin

# pnpm
pnpm tauri add serialplugin

# deno
deno task tauri add serialplugin

# bun
bun tauri add serialplugin

# cargo
cargo tauri add serialplugin

Manual Installation

Backend (Rust)

Add the plugin using cargo:

cd ./src-tauri
cargo add tauri-plugin-serialplugin

Frontend (JavaScript/TypeScript)

Install the JavaScript API:

npm install tauri-plugin-serialplugin-api
# or
pnpm add tauri-plugin-serialplugin-api

Android

USB serial on Android uses pure Rust drivers in crates/android-usb-serial (nusb). Kotlin provides USB permission, enumeration, and a dup'd fd; no vendored Java stack or JitPack dependency.

---

Basic Usage

1. Register the Plugin

   // src-tauri/src/main.rs
   fn main() {
       tauri::Builder::default()
           .plugin(tauri_plugin_serialplugin::init())
           .run(tauri::generate_context!())
           .expect("error while running tauri application");
   }

2. Configure Permissions

   // src-tauri/capabilities/default.json
   {
     "$schema": "../gen/schemas/desktop-schema.json",
     "identifier": "default",
     "description": "Capability for the main window",
     "windows": ["main"],
     "permissions": [
       "core:default",
       "serialplugin:default"
     ]
   }

3. Basic Example

   import { SerialPort } from "tauri-plugin-serialplugin-api";
   
   // List available ports
   const ports = await SerialPort.available_ports();
   console.log("Available ports:", ports);
   
   // Open a port
   const port = new SerialPort({
     path: "COM1",
     baudRate: 9600
   });
   await port.open();
   
   // Write data
   await port.write("Hello, Serial Port!");
   
   // Stream incoming data (desktop + Android)
   const handle = await port.watch({
     onData: (data) => console.log("Received:", data),
     onDisconnect: (reason) => console.log("Disconnected:", reason),
   });
   
   // Stop streaming when done
   await handle.unwatch();
   
   // Close port
   await port.close();

4. Error Handling Example

   import { SerialPort } from "tauri-plugin-serialplugin-api";
   
   async function handleSerialPort() {
     let port: SerialPort | null = null;
   
     try {
       // List available ports
       const ports = await SerialPort.available_ports();
       if (Object.keys(ports).length === 0) {
         throw new Error("No serial ports found");
       }
   
       // Open port
       port = new SerialPort({
         path: "COM1",
         baudRate: 9600
       });
   
       try {
         await port.open();
       } catch (error) {
         throw new Error(`Failed to open port: ${error}`);
       }
   
       try {
         // Write data
         await port.write("Test data");
       } catch (error) {
         throw new Error(`Failed to write data: ${error}`);
       }
   
       try {
         // Read data
         const data = await port.read({ timeout: 1000 });
         console.log("Received:", data);
       } catch (error) {
         throw new Error(`Failed to read data: ${error}`);
       }
   
       try {
         const handle = await port.watch({
           onData: (data) => console.log("Received:", data),
         });
         // ... use handle.unwatch() in cleanup
       } catch (error) {
         throw new Error(`Failed to start watch: ${error}`);
       }
   
       try {
         // Configure port settings
         await port.setBaudRate(115200);
         await port.setDataBits(DataBits.Eight);
         await port.setFlowControl(FlowControl.None);
         await port.setParity(Parity.None);
         await port.setStopBits(StopBits.One);
         await port.setTimeout(1000);
       } catch (error) {
         throw new Error(`Failed to configure port: ${error}`);
       }
   
     } catch (error) {
       // Handle all errors in one place
       console.error("Serial port error:", error);
     } finally {
       // Clean up
       if (port) {
         try {
           await port.close();
         } catch (error) {
           console.error("Error during cleanup:", error);
         }
       }
     }
   }
   
   // Usage
   handleSerialPort();

---

TypeScript Support

This plugin provides full TypeScript support with comprehensive type definitions. All methods, interfaces, and enums are properly typed for better development experience.

Available Types

import { 
  SerialPort, 
  DataBits, 
  FlowControl, 
  Parity, 
  StopBits, 
  ClearBuffer,
  PortInfo,
  SerialportOptions,
  ReadOptions 
} from "tauri-plugin-serialplugin-api";

Type Definitions

• SerialPort - Main class for serial port operations
• DataBits - Enum: Five, Six, Seven, Eight
• FlowControl - Enum: None, Software, Hardware
• Parity - Enum: None, Odd, Even
• StopBits - Enum: One, Two
• ClearBuffer - Enum: Input, Output, All
• PortInfo - Interface for port information
• SerialportOptions - Interface for port configuration
• ReadOptions - Interface for read operation options

Configuration Example with Types

import { SerialPort, DataBits, FlowControl, Parity, StopBits } from "tauri-plugin-serialplugin-api";

const port = new SerialPort({
  path: "/dev/ttyUSB0",
  baudRate: 9600,
  dataBits: DataBits.Eight,        // Type-safe enum
  flowControl: FlowControl.None,   // Type-safe enum
  parity: Parity.None,             // Type-safe enum
  stopBits: StopBits.One,          // Type-safe enum
  timeout: 1000,
  size: 1024
});

// All configuration methods are fully typed
await port.setBaudRate(115200);
await port.setDataBits(DataBits.Eight);
await port.setFlowControl(FlowControl.None);
await port.setParity(Parity.None);
await port.setStopBits(StopBits.One);
await port.setTimeout(500);

Control Signals with Types

// Set control signals
await port.writeRequestToSend(true);
await port.writeDataTerminalReady(true);

// Alternative methods (writeRequestToSend and writeDataTerminalReady)
await port.writeRequestToSend(true);
await port.writeDataTerminalReady(true);

// Read control signals
const cts = await port.readClearToSend();
const dsr = await port.readDataSetReady();
const ri = await port.readRingIndicator();
const cd = await port.readCarrierDetect();

Buffer Management with Types

import { ClearBuffer } from "tauri-plugin-serialplugin-api";

// Check buffer status
const bytesToRead = await port.bytesToRead();
const bytesToWrite = await port.bytesToWrite();

// Clear buffers with type-safe enum
await port.clearBuffer(ClearBuffer.Input);
await port.clearBuffer(ClearBuffer.Output);
await port.clearBuffer(ClearBuffer.All);

// Break signal control
await port.setBreak();
await port.clearBreak();

---

Log Level Control

The plugin provides comprehensive logging control to help you manage verbosity in production environments. By default, the plugin logs informational messages, but you can adjust this to reduce noise or enable detailed debugging.

TypeScript/JavaScript Usage

import { SerialPort, LogLevel } from "tauri-plugin-serialplugin-api";

// Disable all logs (recommended for production)
await SerialPort.setLogLevel(LogLevel.None);

// Show only errors
await SerialPort.setLogLevel(LogLevel.Error);

// Show errors and warnings
await SerialPort.setLogLevel(LogLevel.Warn);

// Show errors, warnings, and info (default)
await SerialPort.setLogLevel(LogLevel.Info);

// Enable all logs including debug information
await SerialPort.setLogLevel(LogLevel.Debug);

// Get current log level
const currentLevel = await SerialPort.getLogLevel();
console.log("Current log level:", currentLevel);

Rust Usage

use tauri_plugin_serialplugin::state::{LogLevel, set_log_level};

// Set log level on plugin initialization
fn main() {
    // Disable logs in production
    set_log_level(LogLevel::None);
    
    tauri::Builder::default()
        .plugin(tauri_plugin_serialplugin::init())
        .run(tauri::generate_context!())
        .expect("error while running tauri application");
}

Or configure via command:

use tauri_plugin_serialplugin::commands::set_log_level;
use tauri_plugin_serialplugin::state::LogLevel;
use tauri::{AppHandle, State};

#[tauri::command]
async fn configure_production_logging(
    app: AppHandle<tauri::Wry>,
    serial: State<'_, tauri_plugin_serialplugin::api::desktop::SerialPort<tauri::Wry>>
) -> Result<(), String> {
    // Only show errors in production
    set_log_level(app, serial, LogLevel::Error)
        .map_err(|e| e.to_string())
}

Log Levels

• None - No logging output (recommended for production)
• Error - Only critical errors
• Warn - Errors and warnings
• Info - Errors, warnings, and general information (default)
• Debug - All logging including debug information (for development)

Common Use Cases

Production Environment

// Disable noisy logs when polling for available ports
await SerialPort.setLogLevel(LogLevel.None);

setInterval(async () => {
  const ports = await SerialPort.available_ports();
  // No extra console noise from the plugin while polling
}, 1000);

Development with Debugging

// Enable detailed logging for troubleshooting
await SerialPort.setLogLevel(LogLevel.Debug);

const port = new SerialPort({ path: "COM1", baudRate: 9600 });
await port.open();
// See all internal events and state changes

Conditional Logging

// Set log level based on environment
const isDevelopment = import.meta.env.DEV;
await SerialPort.setLogLevel(isDevelopment ? LogLevel.Debug : LogLevel.Error);

---

Rust Usage

This plugin can also be used directly from Rust code in your Tauri backend. For complete API documentation, see docs.rs.

Here's how to use it:

Using Commands Directly

You can import and use the command functions directly from the plugin:

use tauri_plugin_serialplugin::commands::{
    available_ports, open, write, read, close, set_baud_rate,
    set_data_bits, set_flow_control, set_parity, set_stop_bits, set_timeout,
    write_request_to_send, write_data_terminal_ready,
    read_clear_to_send, read_data_set_ready,
    bytes_to_read, bytes_to_write, clear_buffer,
    set_break, clear_break
};
use tauri_plugin_serialplugin::state::{DataBits, FlowControl, Parity, StopBits, ClearBuffer};
use tauri::{AppHandle, State, Runtime};
use std::collections::HashMap;

#[tauri::command]
async fn rust_serial_example(
    app: AppHandle<tauri::Wry>,
    serial: State<'_, tauri_plugin_serialplugin::api::desktop::SerialPort<tauri::Wry>>
) -> Result<(), String> {
    // Get available ports
    let ports = available_ports(app.clone(), serial.clone())
        .map_err(|e| format!("Failed to get ports: {}", e))?;
    println!("Available ports: {:?}", ports);

    // Open a serial port
    let path = "COM1".to_string();
    let baud_rate = 9600;
    
    open(
        app.clone(),
        serial.clone(),
        path.clone(),
        baud_rate,
        Some(DataBits::Eight),
        Some(FlowControl::None),
        Some(Parity::None),
        Some(StopBits::One),
        Some(1000u64) // timeout in milliseconds
    ).map_err(|e| format!("Failed to open port: {}", e))?;

    // Write data
    let data = "Hello from Rust!".to_string();
    let bytes_written = write(app.clone(), serial.clone(), path.clone(), data)
        .map_err(|e| format!("Failed to write: {}", e))?;
    println!("Wrote {} bytes", bytes_written);

    // Read data
    let received_data = read(
        app.clone(),
        serial.clone(),
        path.clone(),
        Some(1000u64), // timeout
        Some(1024usize) // max bytes to read
    ).map_err(|e| format!("Failed to read: {}", e))?;
    println!("Received: {}", received_data);

    // Configure port settings
    set_baud_rate(app.clone(), serial.clone(), path.clone(), 115200)
        .map_err(|e| format!("Failed to set baud rate: {}", e))?;
    
    set_data_bits(app.clone(), serial.clone(), path.clone(), DataBits::Eight)
        .map_err(|e| format!("Failed to set data bits: {}", e))?;
    
    set_flow_control(app.clone(), serial.clone(), path.clone(), FlowControl::None)
        .map_err(|e| format!("Failed to set flow control: {}", e))?;
    
    set_parity(app.clone(), serial.clone(), path.clone(), Parity::None)
        .map_err(|e| format!("Failed to set parity: {}", e))?;
    
    set_stop_bits(app.clone(), serial.clone(), path.clone(), StopBits::One)
        .map_err(|e| format!("Failed to set stop bits: {}", e))?;

    // Set timeout
    set_timeout(app.clone(), serial.clone(), path.clone(), 1000u64)
        .map_err(|e| format!("Failed to set timeout: {}", e))?;

    // Control signals
    write_request_to_send(app.clone(), serial.clone(), path.clone(), true)
        .map_err(|e| format!("Failed to set RTS: {}", e))?;
    
    write_data_terminal_ready(app.clone(), serial.clone(), path.clone(), true)
        .map_err(|e| format!("Failed to set DTR: {}", e))?;

    // Read control signals
    let cts = read_clear_to_send(app.clone(), serial.clone(), path.clone())
        .map_err(|e| format!("Failed to read CTS: {}", e))?;
    println!("CTS: {}", cts);

    let dsr = read_data_set_ready(app.clone(), serial.clone(), path.clone())
        .map_err(|e| format!("Failed to read DSR: {}", e))?;
    println!("DSR: {}", dsr);

    // Buffer management
    let bytes_to_read = bytes_to_read(app.clone(), serial.clone(), path.clone())
        .map_err(|e| format!("Failed to get bytes to read: {}", e))?;
    println!("Bytes available to read: {}", bytes_to_read);

    let bytes_to_write = bytes_to_write(app.clone(), serial.clone(), path.clone())
        .map_err(|e| format!("Failed to get bytes to write: {}", e))?;
    println!("Bytes waiting to write: {}", bytes_to_write);

    // Clear buffers
    clear_buffer(app.clone(), serial.clone(), path.clone(), ClearBuffer::All)
        .map_err(|e| format!("Failed to clear buffer: {}", e))?;

    // Break signal
    set_break(app.clone(), serial.clone(), path.clone())
        .map_err(|e| format!("Failed to set break: {}", e))?;
    
    clear_break(app.clone(), serial.clone(), path.clone())
        .map_err(|e| format!("Failed to clear break: {}", e))?;

    // Close the port
    close(app, serial, path)
        .map_err(|e| format!("Failed to close port: {}", e))?;

    Ok(())
}

Advanced Rust Example with Error Handling

use tauri_plugin_serialplugin::commands::{
    available_ports, open, write, read, close, force_close, managed_ports, watch, unwatch
};
use tauri_plugin_serialplugin::state::{DataBits, FlowControl, Parity, StopBits};
use tauri::{AppHandle, State};
use std::collections::HashMap;

#[tauri::command]
async fn advanced_serial_example(
    app: AppHandle<tauri::Wry>,
    serial: State<'_, tauri_plugin_serialplugin::api::desktop::SerialPort<tauri::Wry>>
) -> Result<(), String> {
    // Get available ports with error handling
    let ports = match available_ports(app.clone(), serial.clone()) {
        Ok(ports) => ports,
        Err(e) => {
            eprintln!("Failed to get available ports: {}", e);
            return Err("No serial ports available".to_string());
        }
    };

    if ports.is_empty() {
        return Err("No serial ports found".to_string());
    }

    // Use the first available port
    let port_path = ports.keys().next().unwrap().clone();
    println!("Using port: {}", port_path);

    // Open port with full configuration
    let open_result = open(
        app.clone(),
        serial.clone(),
        port_path.clone(),
        9600u32, // baud rate
        Some(DataBits::Eight),
        Some(FlowControl::None),
        Some(Parity::None),
        Some(StopBits::One),
        Some(5000u64) // 5 second timeout
    );

    match open_result {
        Ok(_) => println!("Port opened successfully"),
        Err(e) => {
            eprintln!("Failed to open port: {}", e);
            return Err(format!("Failed to open port {}: {}", port_path, e));
        }
    }

    // Poll read (for streaming use `watch` + Channel from the frontend)
    match read(app.clone(), serial.clone(), port_path.clone(), Some(1000u64), Some(1024usize)) {
        Ok(data) => println!("Read: {}", data),
        Err(e) => eprintln!("Read failed: {}", e),
    }
    let command = "AT\r\n".to_string();
    match write(app.clone(), serial.clone(), port_path.clone(), command) {
        Ok(bytes) => println!("Sent {} bytes", bytes),
        Err(e) => {
            eprintln!("Failed to write command: {}", e);
            return Err(format!("Write failed: {}", e));
        }
    }

    // Read response with timeout
    match read(
        app.clone(),
        serial.clone(),
        port_path.clone(),
        Some(2000u64), // 2 second timeout
        Some(512usize) // max 512 bytes
    ) {
        Ok(response) => println!("Response: {}", response),
        Err(e) => {
            eprintln!("Failed to read response: {}", e);
            return Err(format!("Read failed: {}", e));
        }
    }

    // Get managed ports
    let managed_ports = match managed_ports(app.clone(), serial.clone()) {
        Ok(ports) => ports,
        Err(e) => {
            eprintln!("Failed to get managed ports: {}", e);
            Vec::new()
        }
    };
    println!("Managed ports: {:?}", managed_ports);

    // Clean up
    let cleanup_result = close(app.clone(), serial.clone(), port_path.clone());
    match cleanup_result {
        Ok(_) => println!("Port closed successfully"),
        Err(e) => {
            eprintln!("Failed to close port: {}", e);
            // Try force close
            if let Err(e2) = force_close(app, serial, port_path) {
                eprintln!("Failed to force close port: {}", e2);
            }
        }
    }

    Ok(())
}

Binary Data Handling in Rust

use tauri_plugin_serialplugin::commands::{open, write_binary, read_binary, close};
use tauri_plugin_serialplugin::state::{DataBits, FlowControl, Parity, StopBits};
use tauri::{AppHandle, State};

#[tauri::command]
async fn binary_data_example(
    app: AppHandle<tauri::Wry>,
    serial: State<'_, tauri_plugin_serialplugin::api::desktop::SerialPort<tauri::Wry>>
) -> Result<(), String> {
    let port_path = "COM1".to_string();
    
    // Open port
    open(
        app.clone(),
        serial.clone(),
        port_path.clone(),
        115200u32,
        Some(DataBits::Eight),
        Some(FlowControl::None),
        Some(Parity::None),
        Some(StopBits::One),
        Some(1000u64)
    ).map_err(|e| format!("Failed to open port: {}", e))?;

    // Write binary data
    let binary_data = vec![0x48, 0x65, 0x6C, 0x6C, 0x6F]; // "Hello" in ASCII
    let bytes_written = write_binary(app.clone(), serial.clone(), port_path.clone(), binary_data)
        .map_err(|e| format!("Failed to write binary data: {}", e))?;
    println!("Wrote {} bytes of binary data", bytes_written);

    // Read binary data
    let received_data = read_binary(
        app.clone(),
        serial.clone(),
        port_path.clone(),
        Some(1000u64), // timeout
        Some(256usize) // max bytes
    ).map_err(|e| format!("Failed to read binary data: {}", e))?;
    
    println!("Received {} bytes: {:?}", received_data.len(), received_data);

    // Close port
    close(app, serial, port_path)
        .map_err(|e| format!("Failed to close port: {}", e))?;

    Ok(())
}

Using Commands vs Direct API

You have two ways to use the plugin in Rust:

Option 1: Using Commands (Recommended)

Import and use the command functions directly. These functions are documented in the docs.rs documentation:

use tauri_plugin_serialplugin::commands::{available_ports, open, write, read, close};
use tauri::{AppHandle, State};

#[tauri::command]
async fn my_serial_function(
    app: AppHandle<tauri::Wry>,
    serial: State<'_, tauri_plugin_serialplugin::api::desktop::SerialPort<tauri::Wry>>
) -> Result<(), String> {
    // Use command functions
    let ports = available_ports(app.clone(), serial.clone())?;
    open(app.clone(), serial.clone(), "COM1".to_string(), 9600, None, None, None, None, None)?;
    // ... rest of your code
}

Option 2: Using Direct API

Use the SerialPort methods directly:

use tauri::State;
use tauri_plugin_serialplugin::api::desktop::SerialPort;

#[tauri::command]
async fn my_serial_function(
    serial: State<'_, SerialPort<tauri::Wry>>
) -> Result<(), String> {
    // Use serial methods directly
    let ports = serial.available_ports(false)?;
    // ... rest of your code
}

Available Rust Types

The plugin provides the following Rust types for configuration:

use tauri_plugin_serialplugin::state::{
    DataBits,      // Five, Six, Seven, Eight
    FlowControl,   // None, Software, Hardware
    Parity,        // None, Odd, Even
    StopBits,      // One, Two
    ClearBuffer    // Input, Output, All
};

Complete Command Functions Reference

Here are all the available command functions you can import and use. For detailed documentation with examples, see the docs.rs documentation:

use tauri_plugin_serialplugin::commands::{
    // Port discovery
    available_ports,           // Get list of available ports
    managed_ports,             // Get list of currently managed ports
    
    // Connection management
    open,                      // Open a serial port
    close,                     // Close a serial port
    close_all,                 // Close all open ports
    force_close,               // Force close a port
    
    // Data transfer
    write,                     // Write string data
    write_binary,              // Write binary data
    read,                      // Read string data
    read_binary,               // Read binary data
    
    // Listening (streaming)
    capabilities,              // Runtime info
    watch,                     // Stream events via Channel
    unwatch,                   // Stop watch session
    cancel_read,               // Cancel poll read or active watch (shared stop channel)
    
    // Port configuration
    set_baud_rate,             // Set baud rate
    set_data_bits,             // Set data bits
    set_flow_control,          // Set flow control
    set_parity,                // Set parity
    set_stop_bits,             // Set stop bits
    set_timeout,               // Set timeout
    
    // Control signals
    write_request_to_send,     // Set RTS signal
    write_data_terminal_ready, // Set DTR signal
    read_clear_to_send,        // Read CTS signal
    read_data_set_ready,       // Read DSR signal
    read_ring_indicator,       // Read RI signal
    read_carrier_detect,       // Read CD signal
    
    // Buffer management
    bytes_to_read,             // Get bytes available to read
    bytes_to_write,            // Get bytes waiting to write
    clear_buffer,              // Clear buffers
    
    // Break signal
    set_break,                 // Start break signal
    clear_break,               // Stop break signal
};

Command Function Signatures

All command functions follow this pattern:

pub fn function_name<R: Runtime>(
    app: AppHandle<R>,
    serial: State<'_, SerialPort<R>>,
    // ... additional parameters specific to the function
) -> Result<ReturnType, Error>

For example:

// Open port
pub fn open<R: Runtime>(
    app: AppHandle<R>,
    serial: State<'_, SerialPort<R>>,
    path: String,
    baud_rate: u32,
    data_bits: Option<DataBits>,
    flow_control: Option<FlowControl>,
    parity: Option<Parity>,
    stop_bits: Option<StopBits>,
    timeout: Option<u64>,
) -> Result<(), Error>

// Write data
pub fn write<R: Runtime>(
    app: AppHandle<R>,
    serial: State<'_, SerialPort<R>>,
    path: String,
    value: String,
) -> Result<usize, Error>

Error Messages

Port Discovery

• "Failed to lock serialports mutex" - Error acquiring mutex lock when listing ports
• "Invalid response format" - Invalid response format from plugin
• "Plugin error: {error}" - Plugin execution error

Port Management

• "Failed to acquire lock: {error}" - Error acquiring mutex lock
• "Port '{path}' not found" - Port does not exist
• "Serial port {path} is not open!" - Port is not open
• "Failed to open serial port: {error}" - Error opening port
• "Failed to clone serial port: {error}" - Error cloning port
• "Failed to set short timeout: {error}" - Error setting timeout
• "Failed to cancel serial port watch: {error}" - Error stopping watch thread
• "Failed to join thread: {error}" - Error waiting for thread completion
• "Failed to cancel serial port data reading: {error}" - Error canceling data reading

Data Operations

• "Failed to write data: {error}" - Error writing data
• "Failed to write binary data: {error}" - Error writing binary data
• "Failed to read data: {error}" - Error reading data
• "no data received within {timeout} ms" - Read timeout
• "Failed to set timeout: {error}" - Error setting timeout

Port Configuration

• "Failed to set baud rate: {error}" - Error setting baud rate
• "Failed to set data bits: {error}" - Error setting data bits
• "Failed to set flow control: {error}" - Error setting flow control
• "Failed to set parity: {error}" - Error setting parity
• "Failed to set stop bits: {error}" - Error setting stop bits

Control Signals

• "Failed to set RTS: {error}" - Error setting RTS signal
• "Failed to set DTR: {error}" - Error setting DTR signal
• "Failed to read CTS: {error}" - Error reading CTS signal
• "Failed to read DSR: {error}" - Error reading DSR signal
• "Failed to read RI: {error}" - Error reading RI signal
• "Failed to read CD: {error}" - Error reading CD signal
• "Failed to set break: {error}" - Error setting break signal
• "Failed to clear break: {error}" - Error clearing break signal

Buffer Management

• "Failed to clear buffer: {error}" - Error clearing buffer
• "Failed to get bytes to read: {error}" - Error getting bytes available to read
• "Failed to get bytes to write: {error}" - Error getting bytes waiting to write

---

Permissions

Below is a list of all permissions the plugin supports. Granting or denying them allows fine-grained control over what your application can do with serial ports.

Permission	Description
serialplugin:allow-available-ports	Allows listing of available serial ports
serialplugin:deny-available-ports	Denies listing of available serial ports
serialplugin:allow-cancel-read	Allows canceling of read operations
serialplugin:deny-cancel-read	Denies canceling of read operations
serialplugin:allow-close	Allows closing of serial ports
serialplugin:deny-close	Denies closing of serial ports
serialplugin:allow-close-all	Allows closing of all open serial ports
serialplugin:deny-close-all	Denies closing of all open serial ports
serialplugin:allow-force-close	Allows forcefully closing of serial ports
serialplugin:deny-force-close	Denies forcefully closing of serial ports
serialplugin:allow-open	Allows opening of serial ports
serialplugin:deny-open	Denies opening of serial ports
serialplugin:allow-read	Allows reading data from serial ports
serialplugin:deny-read	Denies reading data from serial ports
serialplugin:allow-read-binary	Allows reading binary data from serial ports
serialplugin:deny-read-binary	Denies reading binary data from serial ports
serialplugin:allow-write	Allows writing data to serial ports
serialplugin:deny-write	Denies writing data to serial ports
serialplugin:allow-write-binary	Allows writing binary data to serial ports
serialplugin:deny-write-binary	Denies writing binary data to serial ports
serialplugin:allow-set-baud-rate	Allows changing the baud rate of serial ports
serialplugin:deny-set-baud-rate	Denies changing the baud rate of serial ports
serialplugin:allow-set-data-bits	Allows changing the data bits configuration
serialplugin:deny-set-data-bits	Denies changing the data bits configuration
serialplugin:allow-set-flow-control	Allows changing the flow control mode
serialplugin:deny-set-flow-control	Denies changing the flow control mode
serialplugin:allow-set-parity	Allows changing the parity checking mode
serialplugin:deny-set-parity	Denies changing the parity checking mode
serialplugin:allow-set-stop-bits	Allows changing the stop bits configuration
serialplugin:deny-set-stop-bits	Denies changing the stop bits configuration
serialplugin:allow-set-timeout	Allows changing the timeout duration
serialplugin:deny-set-timeout	Denies changing the timeout duration
serialplugin:allow-write-rts	Allows setting the RTS (Request To Send) control signal
serialplugin:deny-write-rts	Denies setting the RTS control signal
serialplugin:allow-write-dtr	Allows setting the DTR (Data Terminal Ready) control signal
serialplugin:deny-write-dtr	Denies setting the DTR control signal
serialplugin:allow-read-cts	Allows reading the CTS (Clear To Send) control signal state
serialplugin:deny-read-cts	Denies reading the CTS control signal state
serialplugin:allow-read-dsr	Allows reading the DSR (Data Set Ready) control signal state
serialplugin:deny-read-dsr	Denies reading the DSR control signal state
serialplugin:allow-read-ri	Allows reading the RI (Ring Indicator) control signal state
serialplugin:deny-read-ri	Denies reading the RI control signal state
serialplugin:allow-read-cd	Allows reading the CD (Carrier Detect) control signal state
serialplugin:deny-read-cd	Denies reading the CD control signal state
serialplugin:allow-bytes-to-read	Allows checking the number of bytes available to read
serialplugin:deny-bytes-to-read	Denies checking the number of bytes available to read
serialplugin:allow-bytes-to-write	Allows checking the number of bytes waiting to be written
serialplugin:deny-bytes-to-write	Denies checking the number of bytes waiting to be written
serialplugin:allow-clear-buffer	Allows clearing input/output buffers
serialplugin:deny-clear-buffer	Denies clearing input/output buffers
serialplugin:allow-set-break	Allows starting break signal transmission
serialplugin:deny-set-break	Denies starting break signal transmission
serialplugin:allow-clear-break	Allows stopping break signal transmission
serialplugin:deny-clear-break	Denies stopping break signal transmission
serialplugin:allow-capabilities	Allows reading runtime plugin capabilities
serialplugin:deny-capabilities	Denies reading runtime plugin capabilities
serialplugin:allow-watch	Allows streaming port data through a Tauri Channel
serialplugin:deny-watch	Denies streaming port data through a Tauri Channel
serialplugin:allow-unwatch	Allows stopping an active watch session
serialplugin:deny-unwatch	Denies stopping an active watch session
serialplugin:allow-set-log-level	Allows setting the global log level
serialplugin:deny-set-log-level	Denies setting the global log level
serialplugin:allow-get-log-level	Allows getting the current log level
serialplugin:deny-get-log-level	Denies getting the current log level

Granting All Permissions (Example)

"permissions": [
  "core:default",
  "serialplugin:default",
  "serialplugin:allow-available-ports",
  "serialplugin:allow-cancel-read",
  "serialplugin:allow-close",
  "serialplugin:allow-close-all",
  "serialplugin:allow-force-close",
  "serialplugin:allow-open",
  "serialplugin:allow-read",
  "serialplugin:allow-write",
  "serialplugin:allow-write-binary",
  "serialplugin:allow-set-baud-rate",
  "serialplugin:allow-set-data-bits",
  "serialplugin:allow-set-flow-control",
  "serialplugin:allow-set-parity",
  "serialplugin:allow-set-stop-bits",
  "serialplugin:allow-set-timeout",
  "serialplugin:allow-write-rts",
  "serialplugin:allow-write-dtr",
  "serialplugin:allow-read-cts",
  "serialplugin:allow-read-dsr",
  "serialplugin:allow-read-ri",
  "serialplugin:allow-read-cd",
  "serialplugin:allow-bytes-to-read",
  "serialplugin:allow-bytes-to-write",
  "serialplugin:allow-clear-buffer",
  "serialplugin:allow-set-break",
  "serialplugin:allow-clear-break",
  "serialplugin:allow-capabilities",
  "serialplugin:allow-watch",
  "serialplugin:allow-unwatch",
  "serialplugin:allow-set-log-level",
  "serialplugin:allow-get-log-level"
]

---

API Reference

Port Discovery

Removed in 3.0.0: available_ports_direct — use available_ports().

macOS duplicates: serialport-rs lists both /dev/cu.* (callout) and /dev/tty.* (dial-in) per device. Pass { singlePortPerDevice: true } to keep one path per device (prefers /dev/cu.*, like Node.js SerialPort.list()). Default returns all paths.

class SerialPort {
  /**
   * Lists all available serial ports on the system
   * @param options.macOS `singlePortPerDevice` — see note above
   * @returns {Promise<{[key: string]: PortInfo}>} Map of port names to port information
   * @example
   * const ports = await SerialPort.available_ports();
   * const onePerDevice = await SerialPort.available_ports({ singlePortPerDevice: true });
   * console.log(ports);
   */
  static async available_ports(options?: AvailablePortsOptions): Promise<{ [key: string]: PortInfo }>;

  /**
   * Subscribe to available-port hotplug (attach/detach). Sends an initial snapshot,
   * then `added` / `removed` events through a Tauri Channel.
   * @param handlers Callbacks for snapshot / added / removed
   * @param options `singlePortPerDevice`, `pollIntervalMs` (desktop default 2000)
   * @returns Handle with `unwatch()` to stop
   * @example
   * const handle = await SerialPort.watchAvailablePorts({
   *   onSnapshot: (ports) => console.log('ports', ports),
   *   onAdded: (path, info) => console.log('plugged', path, info.type),
   *   onRemoved: (path) => console.log('unplugged', path),
   * }, { singlePortPerDevice: true });
   * // later: await handle.unwatch();
   */
  static async watchAvailablePorts(
    handlers: WatchPortsHandlers,
    options?: WatchPortsOptions,
  ): Promise<WatchHandle>;

  /**
   * @description Lists all managed serial ports (ports that are currently open and managed by the application).
   * @returns {Promise<string[]>} A promise that resolves to an array of port paths (names).
   */
  static async managed_ports(): Promise<string[]>;
}

Connection Management

class SerialPort {
  /**
   * Opens the serial port with specified configuration
   * @returns {Promise<void>}
   * @throws {Error} If port is already open or invalid configuration
   * @example
   * const port = new SerialPort({ path: "COM1", baudRate: 9600 });
   * await port.open();
   */
  async open(): Promise<void>;

  /**
   * Closes the serial port connection
   * @returns {Promise<void>}
   * @throws {Error} If port is not open
   * @example
   * await port.close();
   */
  async close(): Promise<void>;

  /**
   * Streams serial port events through a Tauri Channel.
   * @returns {Promise<WatchHandle>} Handle with `channelId` and `unwatch()`
   * @example
   * const handle = await port.watch({
   *   onData: (data) => console.log("Data:", data),
   *   onError: (message) => console.warn("Non-fatal:", message),
   *   onDisconnect: (reason) => console.log("Disconnected:", reason),
   * });
   * await handle.unwatch();
   */
  async watch(handlers: WatchHandlers, options?: WatchOptions): Promise<WatchHandle>;

  /**
   * Runtime plugin info (transport, platform, version).
   * @example
   * const caps = await SerialPort.getCapabilities();
   */
  static getCapabilities(): Promise<Capabilities>;

  /**
   * Forces a serial port to close regardless of its state
   * @param {string} path Port path to force close
   * @returns {Promise<void>}
   * @example
   * await SerialPort.forceClose("COM1");
   */
  static async forceClose(path: string): Promise<void>;

  /**
   * Closes all open serial port connections
   * @returns {Promise<void>}
   * @example
   * await SerialPort.closeAll();
   */
  static async closeAll(): Promise<void>;
}

Data Transfer

class SerialPort {
  /**
   * Writes string data to the serial port
   * @param {string} data Data to write
   * @returns {Promise<number>} Number of bytes written
   * @throws {Error} If write fails or port is not open
   * @example
   * const bytesWritten = await port.write("Hello");
   */
  async write(data: string): Promise<number>;

  /**
   * Reads data from the serial port
   * @param {ReadOptions} [options] Read options
   * @returns {Promise<string>} A promise that resolves to a string
   */
  async read(options?: ReadOptions): Promise<string>;

  /**
   * Reads binary data from the serial port
   * @param {ReadOptions} [options] Read options
   * @returns {Promise<Uint8Array>} A promise that resolves with binary data
   */
  async readBinary(options?: ReadOptions): Promise<Uint8Array>;

  /**
   * Writes binary data to the serial port
   * @param {Uint8Array | number[]} data Binary data to write
   * @returns {Promise<number>} Number of bytes written
   * @throws {Error} If write fails or port is not open
   * @example
   * const data = new Uint8Array([0x01, 0x02, 0x03]);
   * const bytesWritten = await port.writeBinary(data);
   */
  async writeBinary(data: Uint8Array | number[]): Promise<number>;
}

Port Configuration

class SerialPort {
  /**
   * Sets the baud rate
   * @param {number} baudRate Speed in bits per second
   * @returns {Promise<void>}
   * @example
   * await port.setBaudRate(115200);
   */
  async setBaudRate(baudRate: number): Promise<void>;

  /**
   * Sets the number of data bits
   * @param {DataBits} dataBits Number of bits per character (5-8)
   * @returns {Promise<void>}
   * @example
   * await port.setDataBits(DataBits.Eight);
   */
  async setDataBits(dataBits: DataBits): Promise<void>;

  /**
   * Sets the flow control mode
   * @param {FlowControl} flowControl Flow control setting
   * @returns {Promise<void>}
   * @example
   * await port.setFlowControl(FlowControl.Hardware);
   */
  async setFlowControl(flowControl: FlowControl): Promise<void>;

  /**
   * Sets the parity checking mode
   * @param {Parity} parity Parity checking mode
   * @returns {Promise<void>}
   * @example
   * await port.setParity(Parity.None);
   */
  async setParity(parity: Parity): Promise<void>;

  /**
   * Sets the number of stop bits
   * @param {StopBits} stopBits Number of stop bits
   * @returns {Promise<void>}
   * @example
   * await port.setStopBits(StopBits.One);
   */
  async setStopBits(stopBits: StopBits): Promise<void>;

  /**
   * Sets the timeout for read operations
   * @param {number} timeout Timeout value in milliseconds
   * @returns {Promise<void>}
   * @example
   * await port.setTimeout(1000);
   */
  async setTimeout(timeout: number): Promise<void>;
}

Control Signals

class SerialPort {
  /**
   * Sets the RTS (Request to Send) signal
   * @param {boolean} level Signal level (true = high, false = low)
   * @returns {Promise<void>}
   * @example
   * await port.writeRequestToSend(true);
   */
  async writeRequestToSend(level: boolean): Promise<void>;

  /**
   * Sets the DTR (Data Terminal Ready) signal
   * @param {boolean} level Signal level (true = high, false = low)
   * @returns {Promise<void>}
   * @example
   * await port.writeDataTerminalReady(true);
   */
  async writeDataTerminalReady(level: boolean): Promise<void>;

  /**
   * Reads the CTS (Clear to Send) signal state
   * @returns {Promise<boolean>} Signal state
   * @example
   * const cts = await port.readClearToSend();
   */
  async readClearToSend(): Promise<boolean>;

  /**
   * Reads the DSR (Data Set Ready) signal state
   * @returns {Promise<boolean>} Signal state
   * @example
   * const dsr = await port.readDataSetReady();
   */
  async readDataSetReady(): Promise<boolean>;

  /**
   * Reads the RI (Ring Indicator) signal state
   * @returns {Promise<boolean>} Signal state
   * @example
   * const ri = await port.readRingIndicator();
   */
  async readRingIndicator(): Promise<boolean>;

  /**
   * Reads the CD (Carrier Detect) signal state
   * @returns {Promise<boolean>} Signal state
   * @example
   * const cd = await port.readCarrierDetect();
   */
  async readCarrierDetect(): Promise<boolean>;
}

Buffer Management

class SerialPort {
  /**
   * Gets number of bytes available to read
   * @returns {Promise<number>} Number of bytes in read buffer
   * @example
   * const available = await port.bytesToRead();
   */
  async bytesToRead(): Promise<number>;

  /**
   * Gets number of bytes waiting to be written
   * @returns {Promise<number>} Number of bytes in write buffer
   * @example
   * const pending = await port.bytesToWrite();
   */
  async bytesToWrite(): Promise<number>;

  /**
   * Clears the specified buffer
   * @param {ClearBuffer} buffer Buffer to clear
   * @returns {Promise<void>}
   * @example
   * await port.clearBuffer(ClearBuffer.Input);
   */
  async clearBuffer(buffer: ClearBuffer): Promise<void>;

  /**
   * Sets the break signal
   * @returns {Promise<void>}
   * @example
   * await port.setBreak();
   */
  async setBreak(): Promise<void>;

  /**
   * Clears the break signal
   * @returns {Promise<void>}
   * @example
   * await port.clearBreak();
   */
  async clearBreak(): Promise<void>;
}

Log Control

class SerialPort {
  /**
   * Sets the global log level for the plugin
   * @param {LogLevel} level The log level to set (None, Error, Warn, Info, Debug)
   * @returns {Promise<void>}
   * @example
   * // Disable all logs in production
   * await SerialPort.setLogLevel(LogLevel.None);
   * 
   * // Show only errors
   * await SerialPort.setLogLevel(LogLevel.Error);
   * 
   * // Enable debug logs
   * await SerialPort.setLogLevel(LogLevel.Debug);
   */
  static async setLogLevel(level: LogLevel): Promise<void>;

  /**
   * Gets the current global log level
   * @returns {Promise<LogLevel>} A promise that resolves to the current log level
   * @example
   * const currentLevel = await SerialPort.getLogLevel();
   * console.log("Current log level:", currentLevel);
   */
  static async getLogLevel(): Promise<LogLevel>;
}

// Available log levels
enum LogLevel {
  None = "None",      // No logging output
  Error = "Error",    // Only critical errors
  Warn = "Warn",      // Errors and warnings
  Info = "Info",      // Errors, warnings, and info (default)
  Debug = "Debug"     // All logging including debug information
}

Auto-Reconnect Management

class SerialPort {
  /**
   * Enables auto-reconnect functionality
   * @param {Object} options Auto-reconnect configuration options
   * @param {number} [options.interval=5000] Reconnection interval in milliseconds
   * @param {number | null} [options.maxAttempts=10] Maximum number of reconnection attempts (null for infinite)
   * @param {Function} [options.onReconnect] Callback function called on each reconnection attempt
   * @returns {void}
   * @example
   * port.enableAutoReconnect({
   *   interval: 3000,
   *   maxAttempts: 5,
   *   onReconnect: (success, attempt) => {
   *     console.log(`Reconnect attempt ${attempt}: ${success ? 'success' : 'failed'}`);
   *   }
   * });
   */
  enableAutoReconnect(options?: {
    interval?: number;
    maxAttempts?: number | null;
    onReconnect?: (success: boolean, attempt: number) => void;
  }): void;

  /**
   * Disables auto-reconnect functionality
   * @returns {void}
   * @example
   * await port.disableAutoReconnect();
   */
  disableAutoReconnect(): void;

  /**
   * Gets auto-reconnect status and configuration
   * @returns {Object} Auto-reconnect information
   * @example
   * const info = port.getAutoReconnectInfo();
   * console.log('Auto-reconnect enabled:', info.enabled);
   * console.log('Current attempts:', info.currentAttempts);
   */
  getAutoReconnectInfo(): {
    enabled: boolean;
    interval: number;
    maxAttempts: number | null;
    currentAttempts: number;
    hasCallback: boolean;
  };

  /**
   * Manually triggers a reconnection attempt
   * @returns {Promise<boolean>} A promise that resolves to true if reconnection was successful
   * @example
   * const success = await port.manualReconnect();
   * if (success) {
   *   console.log('Manual reconnection successful');
   * }
   */
  async manualReconnect(): Promise<boolean>;
}

Common Use Cases

Reading Sensor Data

const port = new SerialPort({
  path: "COM1",
  baudRate: 9600
});

await port.open();
const handle = await port.watch({
  onData: (data) => {
    const sensorValue = parseFloat(String(data));
    console.log("Sensor reading:", sensorValue);
  },
});
// await handle.unwatch() when done

Binary Protocol Communication

const port = new SerialPort({
  path: "COM1",
  baudRate: 115200
});

await port.open();

// Send command
const command = new Uint8Array([0x02, 0x01, 0x03]);
await port.writeBinary(command);

const handle = await port.watch({
  onData: (data) => {
    const response = data instanceof Uint8Array ? data : new Uint8Array();
    console.log("Response:", response);
  },
}, { decode: false });

Modbus Communication

const port = new SerialPort({
   path: "COM1",
   baudRate: 9600,
   dataBits: DataBits.Eight,
   stopBits: StopBits.One,
   parity: Parity.None
});

await port.open();

function createModbusRequest(address: number, length: number): Uint8Array {
   return new Uint8Array([
      0x01, // Device ID
      0x03, // Function code: Read Holding Registers
      address >> 8, address & 0xFF,
      length >> 8, length & 0xFF
   ]);
}

// Send Modbus request
const request = createModbusRequest(0x1000, 10);
await port.writeBinary(request);

Auto-Reconnect for Reliable Communication

const port = new SerialPort({
  path: "COM1",
  baudRate: 9600
});

await port.open();

// Enable auto-reconnect: restores both open() and watch() after disconnect
// Reconnection uses a fixed interval (options.interval); exponential backoff is not implemented.
await port.enableAutoReconnect({
  interval: 3000,
  maxAttempts: 5,
  onReconnect: (success, attempt) => {
    console.log(success ? `Reconnected on attempt ${attempt}` : `Attempt ${attempt} failed`);
  },
});

const handle = await port.watch({
  onData: (data) => console.log("Received data:", data),
  onDisconnect: () => console.log("Port disconnected — auto-reconnect will reopen and re-watch"),
});
// Manual reconnect also re-establishes watch when a session was active before disconnect
const success = await port.manualReconnect();
if (success) {
  console.log("Manual reconnection successful");
}

// Check auto-reconnect status
const info = port.getAutoReconnectInfo();
console.log("Auto-reconnect enabled:", info.enabled);
console.log("Current attempts:", info.currentAttempts);

// Disable auto-reconnect when no longer needed
await port.disableAutoReconnect();

AT commands (native FIFO queue)

For modems and AT devices, use sendAt() / sendAtPhases() / sendSmsPdu() — native FIFO queue over exchange with line-framed AT completion (OK / ERROR / +CME ERROR as the final line).

Mode	RX	Use when
watch()	Streaming Channel events + optional onUrc	General I/O, live URC
sendAt()	One structured response per command	AT modems, request/response scripts

Capabilities (v3.0):

Feature	Description
AtCommandResult	Structured result: command, response, status, lines, solicitedBody, urcLines, raw
Native queue	Parallel exchange() / sendAt() wait in FIFO (no "Exchange already in progress")
configureAtSession()	Session defaults: expectOk, stopOnError, appendCr, timeouts, resultFormat
Default rxPrepare: 'drain'	Soft idle drain before each command; use purge only for recovery. On Android, drain uses the same hub drain() path as desktop (Rust reader → PortRxHub).
expectOk, solicitedPrefixes	Per-command control via session + AtCommandOptions
Watch during AT	Watch stays active; live SerialEvent::Urc via watch({ onUrc })
Vendor grammar	Auto solicitedPrefixes from command (^, #, $, %, *)
resultFormat: 'numeric'	ATV0 line codes (0/3/4…)
completionMode: 'atIntermediate'	CMGS > prompt and other intermediate lines
sendAtPhases() / sendSmsPdu()	Multi-phase SMS (prompt → PDU → SEND OK)
exchangeBinary()	Binary write + read-until (PDU + Ctrl+Z)
CMUX	enableMux(), openMuxChannel(dlci), virtual paths physical#dlci=N

Migration (v3.0 major):

Was	Now
port.at.enqueue('AT')	port.sendAt('AT')
port.at.enqueuePhases(...)	port.sendAtPhases(...)
port.at.sendSmsPdu(...)	port.sendSmsPdu(...)
port.at.cancel()	port.cancelAt()
new SerialPort({ atSession })	atSession still applies on open() via configureAtSession
Parallel exchange() throws	exchange() awaits turn in native queue

// Session defaults (optional — also via constructor `atSession`)
await port.configureAtSession({ expectOk: true, defaultTimeoutMs: 5000 });

await port.sendAt('AT^SYSCFG?');
await port.sendAt('ATV0', { resultFormat: 'numeric' });
await port.sendSmsPdu(pduLength, pduBytes);

// CMUX: second logical channel on same USB port
await port.enableMux({ command: 'AT+CMUX=0,0,5,31,10,2' });
const dataPort = await port.openMuxChannel(2);
await dataPort.sendAt('AT');

Low-level exchange / exchangeBinary return ExchangeResponse (also queued); cancel_exchange / cancelAt() cancels in-flight work and rejects queued waiters.

---

Android Setup

Android USB serial runs in Rust (android-usb-serial + nusb). Kotlin holds the UsbDeviceConnection fd; the plugin duplicates it and claims interfaces in native code. Add a device_filter.xml in your app for your VID/PID and grant USB permission at runtime.

If you previously added maven { url = uri("https://jitpack.io") } only for usb-serial-for-android, you can remove it.

See android/README.md and android/BUILD_INSTRUCTIONS.md.

---

Contributing

Pull requests are welcome! Please read our contributing guidelines before you start.

---

Development Setup

git clone https://github.com/s00d/tauri-plugin-serialplugin.git
cd tauri-plugin-serialplugin

pnpm i
pnpm run build
pnpm run playground

Testing

Run the full suite locally:

./scripts/verify-android-usb-migration.sh   # full Android USB migration gate
cargo fmt --all -- --check
cargo clippy --all-targets -- -D warnings
cargo test
pnpm install && pnpm check && pnpm test && pnpm build
cd android && ./gradlew test

Virtual serial port (desktop integration)

For manual or integration testing without hardware, pair two PTY endpoints with socat:

socat -d -d pty,raw,echo=0 pty,raw,echo=0
# open the printed /dev/tty* path (or COM* on Windows with com0com)
pnpm playground

Use watch(), exchange(), and sendAt() against that path; unplugging the peer exercises disconnect fail-fast and hub restart behavior.

Unit tests (no hardware)

• Rust: src/tests/mock_serial.rs — scripted RX/TX mock used by cargo test
• JS: tests/*.test.ts — Jest mocks for invoke / Channel
• Android: android/src/test/... — Robolectric for UsbFdBridge; Rust driver tests in crates/android-usb-serial (fake-transport)

Note: bytesToWrite() returns 0 on Android (writes are synchronous over JNI). Desktop returns the driver queue depth when available.

Known limitations

• Windows port enumeration uses wmic for supplemental metadata on some builds. This path is not exercised in CI and may behave differently on Windows 11 if wmic is unavailable or restricted.

---

Partners

If you find this plugin valuable and would like to support further development, feel free to donate via DonationAlerts. Any contribution is greatly appreciated!

---

License

This code is dual-licensed under MIT or Apache-2.0, where applicable, © 2019–2025 Tauri Programme within The Commons Conservancy.